GIMO MOCHUNO
| PARAMITA | WICH | HMD 130m8-IIP | |||
| Rang'iny mar duong' mar piny mangima | -- | 445/130 | |||
| UNIT MAR INJEKS | A | B | C | D | |
| Dhoge mag injekson (kaluwore gi puonj) | cm3 | 193 | 215 | 263 | 316 |
| Kilo mar injekson (PS) | g | 176 | 196 | 239 | 287 |
| oz | 6.2 | 6.9 | 8.4 | 10.1 | |
| Kido mar injekson | g/s | 160 | 178 | 217 | 261 |
| Diamita mar skru | mm | 36 | 38 | 42 | 46 |
| Susa mar injekson | MPa | 230 | 207 | 169 | 141 |
| Ratio mar L/D mar skru | -- | 23.5:1 | 22:1 | 20:1 | 18:1 |
| Strok mar skru | mm | 190 | |||
| Spido mar skru (onge okang') | r/dakika | 0-300 | |||
| UNIT MAR KLAMP | |||||
| Teko mar mako | kN | 1300 | |||
| Strok mar yawo mol | mm | 380 | |||
| Duong' mar platen | mm×mm | 630×610 | |||
| Bor. e kind bar mag tai (H × V) | mm×mm | 425×405 | |||
| Lero maduong' mar odiechieng' | mm | 840 | |||
| Kido mar mol (Matin - Maduong') | mm | 150-460 | |||
| Strok mar golo | mm | 125 | |||
| Tan mar ejektor | kN | 42 | |||
| UNIT MAR TEKO | |||||
| Susa mar sistem mar pi | MPa | 17.5 | |||
| Teko mar masin mar pamp | kW | 31.3 | |||
| Teko mar hita | kW | 11 | |||
| Namba mar zone mag rito liet | -- | 4 | |||
| JOMACHIELO | |||||
| Nyalo mar tangi mar mo | L | 135 | |||
| Pimo mag masin (L×B×H) | m×m×m | 4.5×1.4×1.9 | |||
| Kilo mar masin | Tan | 4 | |||
UNIT MAR INJEKS
Injekson madhi piyo piyo
Bed maber sistem mar rito pi, med ng’wech mar keto injekson ahinya ma dwoko piny thuolo mar ng’ado pi, ahinya ahinya ne gik ma nigi ohinga matin -.
Dizain mar friksion matin
Yunit mar injekson notiyo kod lineargide, mar dwoko piny ng'wech kendo medo ng'wech e kinde mar injekson.
Rod mar silinda mar injekson nyadiriyo
Loki rod mar piston ma nigi yore ariyo mar silinda mar keto lak, med kinde mar ngima mar mo, lak obed motegno.
Skruo kod Barel
Owinjore gi bandi mag liet mag infrared, medo nyalo mar keto plastik.
UNIT MAR KLAMP
Keto teko platen
Platen ma olosi maber ma nigi gedo mapek ahinya, ahinya ahinya ma owinjore gi gik ma itiyogo e loso ohinga matin.
Bar mar tie
Oket kod bar mar chuma ma medo teko mar medo kinde mar ngima.
YUNIT MAR PI
Sistem mar haidrolik
Med sistem mar loch mar haidrolik, masin mapiyo kendo tiyo maber moloyo, duok piny thuolo mar loso gikmoko. Owinjore gi valve ma owinjore, duoko mapiyo kod loch makare.
Haidrolik masin
Motor mar haidrolik ma nigi ng’wech mamalo.
YUNIT MAR TICH
Jarit
Loki kompyuta INOVA mar Itali, ma nigi skrin mar LED ma nigi rangi mar inch 10, ng’e kaka gikmoko timore e yo makare kendo mapiyo.
Gimoro mar stima
Jakontrak kod swich matin luwo Omron kod Schneider.
Nods mag Hoot: loso plastik mar thieth, jo China loso plastik mag thieth, jochiw, kambi
