GIMO MOCHUNO
| PARAMITA | WICH | HMD320FCII |
| Rang'iny mar duong' mar piny mangima | -- | 1930/320 |
| UNIT MAR INJEKS | ||
| Dhoge mag injekson (kaluwore gi puonj) | cm3 | 1435 |
| Kilo mar injekson (PS) | g | 1306 |
| oz | 46.1 | |
| Kido mar injekson | g/s | 543 |
| Diamita mar skru | mm | 75 |
| Susa mar injekson | MPa | 134 |
| Ratio mar L/D mar skru | -- | 21.6:1 |
| Strok mar skru | mm | 325 |
| Spido mar skru (onge okang') | r/dakika | 0-200 |
| UNIT MAR KLAMP | ||
| Teko mar mako | kN | 3200 |
| Strok mar yawo mol | mm | 670 |
| Duong' mar platen | mm×mm | 960×960 |
| Thuolo mantie e kind bar mag tai | mm×mm | 680×680 |
| Lero maduong' mar odiechieng' | mm | 1340 |
| Kido mar mol (Matin - Maduong') | mm | 250-670 |
| Strok mar golo pi | mm | 160 |
| Teko mar golo pi | kN | 77 |
| UNIT MAR TEKO | ||
| Susa mar sistem mar pi | MPa | 17.5 |
| Teko mar masin mar pamp | kW | 64.6 |
| Teko mar hita | kW | 31 |
| Namba mar zone mag rito liet | -- | 5 |
| JOMACHIELO | ||
| Nyalo mar tangi mar mo | L | 380 |
| Pimo mag masin (L×B×H) | m×m×m | 6.8×1.8×2.4 |
| Kilo mar masin | Tan | 12 |
UNIT MAR KLAMP
Otim maber strok ma chako, ma owinjore ahinya gi dwaro mar IML.
Tiyo gi masin ma nigi pi ma ng’ich ahinya mondo ine ni plastik ochung’ motegno kendo kinde mar ngima. En gima ok owinjore mondo E - chaja ochop chaja e wi ng’wech, odwoko piny kinde mar ng’wech.
UNIT MAR INJEKS
Owinjore gi bandi mag liet mag nano-.
YUNIT MAR TICH
Owinjore gi SSR kod valv mar arita mar pi, medo arita mar swich maduong’ kod arita mar plag mondo ober tich mar arita mar masin duto.
Tiyo gi sistem mar ng'ado bura mar INOVA mondo ober ler kod tiyo maber.
YUNIT MAR PI
Tiyo gi sistem mar rito servo, rito teko kod tiyo maber. En yiero ma ok ochuno mar wuotho machalre mar golo e wi yamo mondo odwoko piny kinde mar ng’iyo.
Owinjore gi valve ma owinjore, wuoth mayom kendo mapiyo.
Nods mag Hoot: masin mar keto injekson e basket mar olembe, China joloso masinde mag loso basket mar olembe mag China, jochiw, kambi
